Kärcher RCV 3 Robotic Vacuum

More time for the enjoyable things in life: the smart RCV 3 Robot Vacuum Cleaner takes over the floor cleaning. The RCV 3 robot systematically and independently cleans your hard floors and low-pile carpets. Dry dirt is reliably transported into the built-in waste container by the rotating brush, the side brush for the edges, and the fan. Where needed, the RCV 3 doesn’t just vacuum, but can also damp mop your hard floors. As the battery capacity decreases, the RCV 3 can regularly charge itself and, after the work is done, it always returns to the charging station. Via the app, the device will automatically create a map of the rooms by detecting the surroundings using built-in LiDAR navigation. Individual cleaning parameters can be set for every room – simply select which rooms should be vacuumed, mopped or not cleaned. Additional sensors prevent the device from falling and you can use a preset individual schedule or press a button on the device to start your cleaning. Voice output of the device will provide the most important information and status.

Precise navigation

LiDAR sensors on the RCV 3 allow it to have precise room recording and create detailed mapping for safe cleaning. With its fast and robust LiDAR navigation, the RCV 3 scans your rooms and thus has the best maps to navigate safely and reliably through rooms, even in the dark.

Fall sensors

The fall sensors reliably prevent the RCV 3 from falling down steps or drops. The sensors scan the floor. If a large drop is detected, the robot receives a signal, triggering it to turn around.

Wet mopping

For even better cleaning results, the RCV 3 can also damp mop. If needed, use the wiping unit with microfibre cloth, fill the fresh water tank and you are ready to go. The RCV 3 cleaning robot can either be used for dry cleaning only, for wet mopping only, or with both options together in combined cleaning mode.

Technical data

• Cleaning brush
• Filter: 2 x
• Wiping cloth: 2 x
• Dirt container
• Charging station